很抱歉，因為農曆年快到了，瑣事多了一些，所以一直沒有上網，再加上縱然有一些空，也正忙著試著破解前幾天才釋出的MDaemon 13.6.2，雖然大致上己解決，但還有二個問題沒有突破。 1. 它需要在 Windows 的 hosts 加一組 TCP/IP，我加了一組 127.0.0.1 www.altn.com，一切都 Ok! 就是上不了 MDaemon 的官網（www.altn.com），否則會在它預定半夜 12 點鐘（可由自己另行設定，但都是正點）維護和潔淨過後一、二分鍾 MDaemon 主機就會自行關閉。因為它網頁域名的 IP 就是 127.0.0.1，而我們用的 MDaemon 使用者都是以 127.0.0.1 替代真實 IP。 2. 是 ActiveSync 序號問題，不過我個人卻認為這個問題比較容易解決，因不經過它也不影響在手機上使用。等我一有結果，我會向各位公布，可能是要過了農曆年以後了。 祝各位新年快樂！
新發現不知是官方註冊伺服器有問題還是他們改了設置，現在的MDaemon可以直接用序號產生器產生的序號安裝，安裝完成後就己經自動啟用~不用破解太神奇了~且去執行Cleanup.bat也不會關閉~不知是那裡出了問題~測試了13.5.1~13.6.2都一樣~
但在它自動設定在子夜12點鐘的時候，執行維護與淨化的時候會產生如下之執行後文字，執行完畢後1~2分鐘內，仍會自動關機。但我己研究出一組 TCP/IP，使它不會再關機，又能上它的官網。等你發現它仍會關機後，請你用 E-mail 告訴我，我寄給你。 Sun 2014-01-26 01:00:33: Starting daily maintenance event Sun 2014-01-26 01:00:33: * Checking for/sending software license renewal coverage expiration warning(s) Sun 2014-01-26 01:00:33: * Checking for/sending SecurityPlus expiration warning(s) Sun 2014-01-26 01:00:33: * Checking for/sending Outlook Connector expiration warning(s) Sun 2014-01-26 01:00:33: * Checking for/sending Activation warning(s) Sun 2014-01-26 01:00:33: * Deleting/rotating encryption keys Sun 2014-01-26 01:00:33: * Executing MyCleanup.bat (if it exists) or Cleanup.bat (if it doesn't) Sun 2014-01-26 01:00:33: * Executing listprune.exe to clean up mailing lists Sun 2014-01-26 01:00:33: * Executing accountprune.exe to clean up inactive accounts and old mail Sun 2014-01-26 01:01:01: * Cleaning up quarantined files, messages, and restricted attachments Sun 2014-01-26 01:01:01: * Expiring old data from .dat files Sun 2014-01-26 01:01:01: * Executing spam filter learning engine Sun 2014-01-26 01:01:01: * Performing BES maintenance Sun 2014-01-26 01:01:01: * Performing Statistics database maintenance Sun 2014-01-26 01:01:01: * Performing ActiveSync maintenance Sun 2014-01-26 01:01:01: * Generating and emailing reports Sun 2014-01-26 01:01:01: * Creating/sending statistics report email Sun 2014-01-26 01:01:02: * Sending spam filter report email Sun 2014-01-26 01:01:02: --------- Sun 2014-01-26 01:01:01: Statistics database cleanup started Sun 2014-01-26 01:01:02: Statistics database cleanup completed Sun 2014-01-26 01:01:02: ----------
關於 MD 13.6.2 我在 #121 所敍述的問題己解决，fz500 在 #122 所說的也是真實的。惟須 同時在 Windows -> System32 -> drivers -> etc -> hosts 裡加一行 127.0.0.1 www.altn.com。讓 MDaemon 主機開一個晚上，至第二天仍一切正常，遂將 hosts 裡加進去的那一行 127.0.0.1 www.altn.com 删除。以後即可正常運作。
In the midnight to run automatically after the maintenance and cleanup, did not see MdUpdater.exe has been deleted information .
MDaemon 13.6.1 or Above A new page has been added to F2|Server Settings which will allow you to configure MDaemon's simple message recall system. It works like this: an incoming message from an authenticated local user can be delayed for 1 to 15 minutes (you can decide how long). During this delay period the message is simply left in the inbound mail queue. The idea is to provide a grace period for your users to realize they need to recall a message. Once the delay period expires the message is delivered like normal. However, if during the delay period, the same authenticated account which created the message to be recalled should also send a RECALL email to the MDaemon@ system account which specifies the Message-ID of the message(s) to be recalled then those recalled messages are deleted from the inbound queue as if they never arrived and the recalled message will not be delivered to anybody. This is the only way to guarantee that none of the recipients of the recalled message will ever see the message. MDaemon will notify the sender of the RECALL message as to the success (or failure) of the attempt. The RECALL must be performed while the message is still present in the inbound queue. After that, its likely too late to guarantee that the recipients have not already seen it. Accounts can not recall messages sent by other accounts and SMTP authentication is required for each step of the process. Only messages from authenticated local accounts are subject to the recall delay. All recall processing is logged to the Routing and Mail|MDaemon UI/log files. Here's how to send a RECALL message (pick one): 1) From your mail client's Sent folder right-click (or whatever your mail client requires) and Forward As Attachment the email(s) that you want to recall, put RECALL as the message subject and send that to the MDaemon@ system account. 2) From your mail client's Sent folder view the headers of the message you want to recall. Copy the Message-ID header value (the part to the RIGHT of the Message-ID: string) to the clipboard. Create a new message to the MDaemon@ system account and place RECALL plus the message ID value on the subject. It should look something like this: RECALL <5268dc1a.1020...@example.com>. Either of these methods work but only the second is used if both are performed within the same RECALL message. This feature is disabled by default. The default delay interval is 1 minute. WorldClient may also be used to recall messages. WorldClient will display a "Recall" button when viewing recent messages in the Sent Items folder. If clicked before the recall time limit expires, WorldClient will send a RECALL message to MDaemon. MDaemon will send an email back to the user saying whether the recall was successful. 一個新的頁面已被添加到F2 |服務器設置，將允許您配置MDaemon的簡單的信息，召回制度。它的工作原理是這樣的：從身份驗證的本地用戶的傳入消息可以延遲1 〜15分鐘（你可以決定多長時間） 。在這段延遲期間的消息僅僅是留在入站郵件隊列。我們的想法是提供一個寬限期為您的用戶認識到他們需要召回的消息。一旦延遲期限到期的消息被傳遞正常人一樣。但是，如果在延遲時間內，它創造了被召回的消息相同身份驗證的帳戶應該也發送了召回郵件到指定郵件的郵件ID （ S）的MDaemon的@系統帳戶被召回那麼那些回憶訊息從入站隊列，好像他們從來沒有趕到，被召回的消息將不會傳遞到任何人都將被刪除。這是為了保證沒有召回消息的收件人永遠不會看到該消息的唯一途徑。 MDaemon將通知召回消息的發送者以嘗試的成功（或失敗） 。而該消息仍然存在於入站隊列的RECALL必須執行。在此之後，它可能為時已晚，以保證收件人還沒有看到它。賬戶不記得其他帳戶和SMTP驗證發送的消息是必需的過程的每一步。從認證的本地帳戶只的消息受召回延遲。所有召回處理記錄到路由和郵件| MDaemon的用戶界面/日誌文件。 以下是如何發送一個召回消息（任選其一） ：要記得1）從您的郵件客戶端發送文件夾中右鍵單擊（或任何你的郵件客戶端需要），並作為附件轉發的電子郵件（次） ，把召回的郵件主題和發送到MDaemon的@系統帳戶。 2）從你的郵件客戶端發送文件夾中查看您想要撤回該郵件的標題。郵件ID標頭值（該部分的郵件ID的權利：字符串）複製到剪貼板。創建一個新的消息到MDaemon的@系統帳戶和地點RECALL再加上受該消息ID值。它應該是這個樣子： RECALL < 5268dc1a.1020 ... @ example.com > 。這兩種方法都可行，但如果兩者是相同的召回消息中只進行第二次使用。此功能默認情況下禁用。默認的延遲時間間隔為1分鐘。 WorldClient中也可以使用回收的消息。的WorldClient將在已發送郵件文件夾中查看最近的消息時顯示“調用”按鈕。如果召回期限屆滿之前單擊， WorldClient中會發出召回信息到MDaemon 。 MDaemon將發送一封電子郵件回話說召回是否成功的用戶。
