语言：英语，中文 ,支持SolidWorks 2009-2014 32bit/64bit 对于3DQuickPress 5.4.1 x64挂SolidWorks2014 x64，SolidWorks需要升级到SP2，否则出错！ 包括完整版3DQuickPress v5.4.1 ISO，以及单独的3DQuickPress 5.4.1升级包，但必须先装3DQuickPress 5.3.0。 3DQuickPress是3DQuickTools跟智诚科技ICT共同合作研发的一套完全整合于SolidWorks的三维连续冲模设计解决方案，是SolidWorks公司认证的黄金合作伙伴。与SolidWorks统一界面，完全一致的使用风格。本系统包含零件分析及展开、料带布排、模架及冲头设计等功能，为电子、家电及汽车结构设计等行业提供从三维建模，零件展开，三维组装到二维出图的完整解决方案。 3DQuickPress唯一使用3D才能解决在2D作业中所无法预知的错误并透过协同设计达到快速准确的冲模设计。3DQuickPress是SolidWorks对于冲模设计的解决方案软件。直接透过3D模型，迅速完成连续冲模的设计，并透过eDrawing有效地达到资料沟通，因而能在短期间完成冲模设计。强大的钣金特微辨识处理技术可以快速依据SolidWorks钣金或其他CAD系统输入的零件料所提供的资料库来计算出弹性与弯曲的误差，以及冲压行程的调整与模具的自动产生。 3DQuickPress v5.4.1 for SolidWorks 2009-2014 x86/x64 2.71G This module is designed for die design action sequences dividing (cutting, punching) and form-building (bending, stretching) operations stamping. It allows the designer to use the equipment ready algorithm design of the stamp, special design tools, as well as libraries of standard components. The initial data for the development of the stamp is a 3D-model of the detail, developed in SolidWorks or imported into it from another CAD system. Included in the modules 3DQuickPress building developments, the formation of the working area of the stamp and the spatial layout of the stamp allows the designer to lead the process of developing a stamp series, building on the work of previous modules 3DQuickPress version 5.4.1 Update notes: This hotfix only update 3DQuickPress version 5.3.0 to 5.4.1 Please install 3DQP 5.3.0 version and apply this patch. Enhancements: 1. SolidWorks 2014 supports. 2. XForm features supports pitch change for in-place cut features and user define features. 3. Nesting results can be carried to strip layout parameters. 4. Create SL drawing will skip isolated stations. Fixes: 1. Fixed rebuild cutting punch problem. 2. Problems in component opening function is fixed. System： Preset SolidWorks 2009-2014 32bit/64bit ………………….
